Log Templates

Edit

Log Templates

back

Edit

Introduction

Templates are the building blocks of your 24 hour formats. You can access templates from Settings and directly from the Log window.

Edit

Access

Access from settings

You click on the Templates icon:

Image


If you have more that one station you will get the Choose Station window:

Image


Choose the station you want to work on;

If you are a single station you will go directly to the Log Templates window.

Access from within the Log

Under Tools in the Main Menu:

Image




Edit

Templates Window

The templates window has 4 areas of notice:

Image


The Main Menu, Icon Bar ,Elements Dropdown and the Template Pane.



Edit

Main Menu

Has three items File, Elements, Tools:

Image







Edit

Icon Bar

The icon bar has 4 icons accioated with icons under File in Main Menu:

Image


We have place these here for ease of use.

Edit

Elements Dropdown

On the Left side of the window is a large section with the ability to dropdown your elements:

Image


These are;
Edit

Template Pane

On the Right Side of the window is the Templates pane:

Image


This is where you make your templates.



Edit

Usage

Edit

Building a Template

To build a template, chose NEW from the FILE menu at the top of the screen to clear the main template window.

Image

The key to building templates is that they are not time dependent. When you build the actual formats in RadioTraffic, you will be prompted to choose the hour for the chosen template to be used. So when building templates, build for the midnight (00) hour.

First, place something at the top of the hour. This can be a commercial break, static cart with a Legal ID or just a log note that says "Legal ID." In the left side window, click on the + next to "Log Notes" to expand that listing in the window. Double click on the item you wish to add to make the ADD window appear.

Image


Enter the time where you want the log note placed and click OK to insert it into the template.

This is important because when you place a template in a format...or when you use a template to overwrite a daily log in the event of a special broadcast...the template will put the first item at the time you enter rather than the time on the template.

For example, you have a template that has nothing until 20 minutes after the hour and you don't put a log note at the 00 time point in the hour. You wish to put this log into your 7am hour, meaning the first break is at 7:20. If you click to add the template and put in "07:00:00" for the 7am hour, the first break will be at 7:00, NOT 7:20.

A log note doesn't impact on air automation, so they're always safe bets to use at the top of the hour.

If you have more log notes to place in the hour, do those before moving on to the next step.

Second, place any automation commands. This is both the commands for your on-air automation system or static carts that need to be placed in the hour. As with Log Notes, click the + to expand the list of automation commands and double click the one you wish to place into the template.

Image

If you need to modify an already placed automation command, double click on the command in the template to open the editing window. Make your changes and then click OK to save.

Image

Third, place your program names. The program names have no impact on the actual on-air automation. They are mostly a way for you to keep track in your templates of the shows airing within that hour.

Image

Finally, you'll place your spot breaks.

Image

To add the commercial breaks, double click on them to open the add break window.

Image


Start Time - Time you wish the break to start.
Length - Total length of the break. This can be entered in seconds or in a MM:SS format. If you enter in seconds, RadioTraffic will automatically convert it to an MM:SS format. RadioTraffic will not schedule more commercials than can fit under the time limit entered into this field.
Units - This is the total number of spots allowed to be scheduled in the break. RadioTraffic will not schedule more spots than the limit you place into this field. NOTE: This could mean that your break doesn't fill to the maximum amount of time. To make sure the maximum amount of units can fill a break, divide the total time in the break by the lowest unit of time you sell. For example, a four minute break on a station that sells 30 second spots would be 240 seconds divided by 30 seconds...for a total of 8 spots.
Priority - Tells RadioTraffic the order breaks should be filled in that template. If left blank, spots will be placed in all breaks evenly.



Edit

Avail Types

Avail types are the different elements used to build templates & formats and also to define in each individual order the location on the log/format where the spots are to be placed.

This allows you to customize the logs to increase your speed in log processing. For example, if you have sponsors for your weather in each hour, creating a avail type of "Weather Sponsor" can allow you place only weather sponsors within that avail. You no longer have to hunt through the logs to make sure sponsors are placing next to their sponsored item!

Image


You cannot delete avail types from this window. If you wish to delete a avail type, first make sure that the avail type is not being used in any template or format. If you are using the avail type, it can cause problems with the formats and templates that are using it. If you have a format or template using the avail type replace it with another avail type or delete the avail entirely. Then contact your RadioTraffic support representative to have the avail type removed.

Adding an avail type

To add a avail type, click the NEW button to bring up the new avail type window:

Image


Type the name of the new avail type into the data field and click OK or APPLY to save.

In the top menu, you have these options under FILE:

New - Allows you to add a new avail type.
Open - Opens an existing avail type to change the name.
Export - Allows you to export the currently displayed template to Microsoft Excel Spreadsheet, Adobe PDF, Microsoft Rich Text File Format, Text (Tab Delimited), Web Page
Print - print to a local or network printer
Print Preview - Preview print output on screen
Close - Closes the window



Edit

Automation Commands

Image

Automation commands allow you to do two functions in templates and formats. The first is to control your on-air automation through the export log. The second is to create static carts if you have pieces of audio that play at the same time every day.

Edit

Controlling Automation

Depending on the make of your automation system, RadioTraffic can send commands through the log to control your automation. Click the NEW button to open the add automation command window.

Image

(Check your automation system's user manual to see if it can accept programming commands from the imported traffic log. That manual should also show you the commands that need to be used to control the automation.)

Any length command can be put into the data field. You must enter data into both the description and command field. Click OK to save when finished.

Edit

"Static Carts"

If you have a piece of programming that uses the same cart number at the same time every day, you can schedule these in your templates and formats by creating a static cart automation command. Click NEW to open the new command window.

Image

Place the cart number in the cart line. You can also put an automation command on the cart if your particular automation system allows it. (Check your automation system manual to see if you can put commands on static cart numbers.) Click OK to save when finished.

Edit

Log Notes

Log notes are items printed on hard copies of logs. They have no impact upon the exported automation log.

Image


Edit

Programs

Programs are the names of programs you run on your air. They have no impact on the export log to your automation.

Image


Edit

Saving the Template

Once you have built your template, you save it by choosing "save as" in the FILE menu and giving the template a unique name.

Image





Edit

FAQ

TODO

Edit

Additional Information

TODO

ADD-ON:
Contact sales for pricing